Removing
Press the injector upwards -arrow A- and pull it back out of the bonnet -arrow B-.
Disconnect hose -1- from injector and connector -2-.
Installation
Connect plug -2- and hose -1- to injector. Insert the nozzle into the mounting hole until it clicks into place. Adjust nozzles.
Windshield injector adjustment
Instructions: If the nozzles are dirty and spray liquid unevenly, remove and rinse the nozzles under running water in the opposite direction. In conclusion, you can blow the jets in the opposite direction with a jet of compressed air. Do not use foreign objects to clean the jets!
Visitor comments