The direction of pressure on the windshield washer nozzles to remove it from the hood
- 1 - washer nozzles;
- 2 - an arrow indicating the initial pressure of the nozzle;
- 3 - nozzle retainer;
- 4 - arrow indicating the direction of removal of the nozzle
Removing
1. Open the hood.
2. Press the spray nozzles with your hand in the direction of the car and in this position move the nozzles down and remove it from the hood.
3. Disconnect the fluid supply hose from the nozzle.
4. Disconnect the windshield washer nozzle heater wire from the hood and disconnect the electrical connector from the heater.
Installation
1. Attach the fluid supply hose to the nozzles.
2. Connect the electrical connector to the nozzle heater and secure the wire to the hood.
3. By pressing on the washer nozzles, fix it in the hood.
4. Check the direction of the windshield spray and adjust the washer nozzles if necessary.
Visitor comments