Proper spraying of liquid on the windshield
If the jet of liquid sprayed by the nozzles is at different heights on the windshield (A and B), the washer nozzles must be replaced.
Location of the eccentric for adjusting the spray jet of liquid
When the eccentric is turned counterclockwise, the stream of liquid sprayed by the nozzle rises upward.
Adjustable washer nozzles are installed on cars, which allow the height of the sprayed liquid stream to be adjusted. For this purpose, an eccentric is installed at the base of the nozzle. When the eccentric is turned counterclockwise, the liquid stream sprayed by the nozzle rises upward.
If necessary, blow out the washer nozzles with compressed air. To do this, remove the nozzles and blow it from the hose connection side.
Do not blow through the nozzles in the opposite direction to the fluid flow.
Visitor comments