Contents: Removal ↓ Installation ↓
Location of windshield washer reservoir mounting nut
The fastening nut is shown by the arrow.
The washer reservoir is installed in the front right part of the engine compartment.
Removal
1. Unscrew the two screws securing the expansion tank of the cooling system and, without disconnecting the hoses from it, move it to the side.
2. Unscrew the two screws securing the activated carbon filter and, without disconnecting the hoses from it, move it to the side.
The original article is available at VWmanual.ru
3. Unscrew the nut (shown by arrow), securing the windshield washer reservoir.
4. Disconnect the electrical connector and remove the water pump from the windshield washer reservoir.
5. Remove the windshield washer reservoir.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments