Instructions: The following illustrations show the replacement of the right high beam bulb. Replacing the pump for the left high beam headlight is done in the same way.
Switch off the ignition and all electrical consumers, remove the ignition key. Remove plug -1-. Unscrew socket with handle -1- in -direction of arrow- and remove it with main beam bulb as far as cable length allows.
Remove main beam bulb -1- in -direction of arrow- from socket with handle -2-. High beam lamp 12 V, 55 W.
Installation is carried out in reverse order.
Caution: When installing the cover, pay attention to the correct position of the cover. If water gets inside the headlight, it may fail. When installing the lamp, do not touch the glass bulb. Fingers leave greasy imprints on the glass of the lamp, which evaporate after turning on the headlights, and the light of the lamp may dim.
Check headlight operation. Check headlight setting and adjust if necessary.
Visitor comments