Instructions: The following illustrations show the replacement of the right dipped beam headlight bulb. Replacement of a lamp of the left headlight of a passing beam is made similarly.
Switch off the ignition and all electrical consumers, remove the ignition key. Remove plug -2-.
Unscrew socket with handle -1- in -direction of arrow- and pull it out with dipped beam bulb as far as cable length allows.
Pull dipped beam bulb -1- in -direction of arrow- out of socket with handle -2-. Dipped beam headlight bulb 12 V, 55 W.
Installation is carried out in the reverse order.
Caution: When installing the cover, pay attention to the correct position. If water gets inside the headlight, it may fail. When installing the lamp, do not touch the glass bulb. Fingerprints leave greasy prints on the lamp glass, which evaporate after switching on the headlights, and the light of the lamp may dim.
Check headlight operation. Check headlight setting and adjust if necessary.
Visitor comments