Instructions: Do not confuse the driver's and passenger's windshield wiper blades when installing. Frameless wipers have very low rigidity. To lift the wipers from the windshield, take them only in the area where the wipers are attached. To remove the wiper blades, the wiper arms must be in the "service/winter position". The "service/winter position" is activated within 10 seconds after turning off the ignition by switching the wiper lever to the "Pulse mode" position.
Set the windshield wiper arms to the "service/winter position". Fold back the windshield wiper arm. Press button "1" and pull the windshield wiper lock "3" in the -direction of the arrow- from the windshield wiper arm "2".
Installation in reverse order, taking into account the following. Insert the wiper blade retainer "3" until it stops in the wiper arm "2". Make sure that the button "1" is securely fixed in the wiper arm "2". Carefully lower the wiper arm back onto the windshield.
[View the original on this resource www.VWmanual.ru]
Visitor comments