2. Pinch the ends of the plastic insert on the U-shaped end of the lever together, then slide the wiper blade off the lever, twisting it to release (see photos 23.2a and b).
Photo 23.2a. Releasing the wiper blade from the lever.
Photo 23.2b. Removing the windshield wiper from the lever.
3. To remove the lever, remove the plastic plug and unscrew the mounting nut (see photo 23.3).
Photo 23.3. Removing the windshield wiper arm cap.
4. Remove the lever from the drive spindle cotter pins (see photo 23.4).
Photo 23.4. Removed windshield wiper arm.
5. Installation is carried out by performing the above steps in reverse order, however, when installing the lever, make sure that the windshield wiper motor is in the off position, and then position the lever in accordance with Figure 10.24.
The information is posted on this resource (www.VWMANUAL.ru)
Figure 10.24. Installing the windshield wiper arms and washer nozzles (Section 23). a = 120.0 mm; b = 130.0 mm; c = Manual control 50.0 mm Electric drive 200.0 mm; d = manual control 50.0 mm electric drive 200.0 mm; f = 540.0 mm.
Visitor comments