Front dimensions
1. The bulb holders are located in the headlight reflectors. Remove the front headlight as described in section 16 and unscrew the parking light bulb from the reflector by turning it counterclockwise (see photo 18.1).
Photo 18.1. Removing the parking light bulb from the front headlight.
2. Installation is carried out by performing the above steps in reverse order.
Front direction indicator
3. Loosen the screws and remove the lens (see photo 18.3).
Photo 18.3. Removing the front turn signal bulb lens.
4. The light bulb is of the wedge type.
5. When installing the lens, do not overtighten the screws and make sure the gasket is in good condition.
The original can be viewed on the portal VWmanual.ru
Tail light assembly
6. All operations are similar to those described for the front turn signal bulb (see photo 18.6).
Photo 18.6. Removing the rear light lens.
Visitor comments