Instructions: The following describes the removal and installation work on the left side of the car. Removal and installation on the right side is carried out in a similar way.
Switch off the ignition.
Instruction: If only the sun visor is to be removed, the screw -2- and sun visor support -3- do not need to be removed.
Use a small screwdriver to open covers -1- and -4-. Remove screws -2- and -5- (2 Nm). Remove sun visor support -3-. Carefully remove sun visor support -6-.
Caution: Hold on to the sun visor! Do not leave the visor hanging on the wiring harness!
Carefully unplug connector 1 from visor -2-, do not pull flat wire.
Visitor comments