4 cylinder engine
Removing
Remove oil pan.
Loosen the mounting bolts, remove the oil pump.
Examination
Disassemble the oil pump. The side clearance in the gearing should be a maximum of 0.05-0.20 mm.
Check the axial clearance with a steel ruler and feeler gauge. The axial clearance must be max. 0.15 mm.
Installation
Unscrew the oil receiver from the oil pump cover and flush with fuel.
Assemble and install oil pump.
Tighten the fastening bolts to 10 or 20 Nm, see above.
Install oil pan.
Drain plug: Replace sealing ring, tighten plug to 30 Nm.
Fill with oil, insert the oil level indicator.
Carry out a test drive and check the oil pan for leaks.
Visitor comments