Switch off the ignition. Remove the front panel side trims. Remove storage box. Unlock the locks and remove the steering column switch cover. It is not necessary to remove the entire steering column trim panel. Remove light switch -E1-. Remove the left trim on the driver's side. Remove trim for heater and air conditioner control panel. Remove the center console cover. Remove footwell trim on both sides.
Vehicles with center console without center armrest
Remove center console without center armrest.
Vehicles with center console with center armrest
If present, remove DVD player, If present, remove CD changer. If present, remove holder for "iPod player" firms "Apple". If present, remove storage compartment with USB connector. If present, remove the multimedia system control unit.
Cars with a multimedia system
Remove the multimedia system control panel.
Vehicles with inverter with socket, 12 V-230 V -U13-
Remove inverter with socket, 12 V-230 V -U13-. Remove the rear panel of the center console. Remove center console with center armrest. Remove two screws -2-. Remove fifteen screws -1- and remove trim from dash panel.
Installation
Pass the connector and cable of the light switch and headlight range control through the corresponding hole. Screw the cladding in the specified sequence (1.5 Nm).
Visitor comments