Pic. 1.32. Steering column switch for direction indicators and headlights
The direction indicators only work when the ignition is on.
Right Turn Signal - Switch Up 1.
Left turn signal - switch down 2.
When the direction indicator is on, the control lamp flashes simultaneously.
Giving a turn signal before changing lanes
The switch should only be pressed up 1 or down 2 to the intermediate stop point and held in this position - the control lamp should flash simultaneously with the direction indicator.
High beam on/off
Inclusion.
With the dipped beam on, push the stalk forward 3. When switching to high beam, the high beam warning lamp lights up.
When the high beam is on, the low beam is also on.
Shutdown.
Pull the steering column switch back, against the direction of the arrow 3
Light signal.
Move the steering column switch to the steering wheel 4 - the high beam warning lamp will light up.
Parking lighting.
The parking lights are on only when the ignition is off.
Parking lights on the right - switch up 1.
Parking lights on the left - switch down 2.
After the key is removed from the ignition, the buzzer sounds when the driver's door is open.
Visitor comments