Outdoor light switch
Pic. 1.31. Lighting mode switches: 1 - outdoor lighting switch; 2 - illumination of control devices; 3 - headlight range adjustment
The dipped beam and main beam function only when the ignition is on. During engine start and after the ignition is switched off, the parking lights are automatically switched on.
Attention: If after removing the key from the ignition switch the lights remain on, the buzzer will sound when the driver's door is open.
Fog lights
Pull the outdoor lighting switch in the positions of the parking lights or low / high beam to the first fixed position.
When the fog lights are on, the corresponding icon glows green.
Rear fog lamp
Vehicles without fog lamps.
Turn the outdoor lighting switch to the low/high beam position and pull it out as far as it will go.
Cars with fog lights.
Pull the outdoor light switch in the position of the parking lights or low / high beam to the second detent position.
Attention: When the rear fog lamp is on, the control lamp in the instrument panel is on.
Illumination of control devices
When the outdoor lighting is on, the brightness of the illumination of the control devices is smoothly regulated by a dial located next to the outdoor lighting switch.
Headlight beam leveler
With the help of an electrically operated adjusting mechanism, the headlight beam angle can be continuously adjusted according to the vehicle load. This reduces the risk of dazzling oncoming drivers. At the same time, due to the correct installation of the headlights, the driver is provided with better visibility conditions.
The headlight adjustment process can only be carried out when the dipped beam is on.
To lower the light cone downwards, the rotary control must be moved from the initial position (–) turn down.
Automatic headlight range control.
On vehicles with xenon headlamps, the headlight range is automatically adjusted dynamically when the ignition is switched on. This means that the length of the light cone is subject to continuous readjustment in accordance with the vehicle's load and its longitudinal inclination during acceleration and deceleration.
Rear window heating
Heating functions only when the ignition is on. When the heating is switched on, the control lamp in the switch lights up.
Alarm
The alarm system also functions when the ignition is off.
Turn on the alarm when, for example:
- you have reached the end of the traffic jam;
- you have been involved in a traffic accident or the vehicle has stopped due to a technical malfunction.
When the alarm is on, all direction indicators flash simultaneously. The direction indicator lamps and the control lamp in the switch also flash.
Sun blind motor switch
When there is intense sunlight through the rear window, the sunblind can be pulled out electrically.
To raise or lower the curtain, briefly press the button. The shutter will move to the appropriate end position.
Attention: When the curtain is extended, the view of the traffic situation behind the car through the interior rear-view mirror is significantly limited.
Visitor comments