Removal and installation of the outer part of the rear door is carried out in the same sequence as on the front.
61.0. Rear side door fastening. Golf cars
1 - rear side door
2 - rear trim. The trim is secured with clamps 3. Removing the trim should start from the bottom
3 - rear door frame trim fasteners
4 - front trim. The trim is secured with clamps 5. Removing the trim should start from the bottom
5 - Front door frame trim fasteners
61.0a. Rear side door. Golf cars
1 - rear side door
6 - Three bolts, type A with a pointed rod and a thick washer. Tightening torque 10 Nm.
7 - 11 bolts, type B with blunt shank and thick washer. Tightening torque 14 Nm
8 - Four bolts, type C with pointed shank and thin washer. Tightening torque 10 Nm
Visitor comments