Radiator of the cooling system
- 1 - a bolt of fastening of the holder of the fan;
- 2 - temperature sensor;
- 3, 4 - radiator holders
Order of execution
1. Install the fan holder to the radiator and secure with screws (1), by tightening them with a torque of 10 Nm.
2. Screw the temperature sensor into the radiator, tightening it with a torque of 35 Nm.
3. Put the holders on the radiator (3, 4).
4. Install the radiator in place and secure with bolts, tightening them with a torque of 10 Nm.
Cars with air conditioning
5. Reinstall the capacitor and secure it with bolts, tightening them with a torque of 10 Nm.
6. Reinstall the upper front cross member.
7. Connect the electrical connectors to the temperature sensor and radiator fan.
8. Connect the pipes of the cooling system with new sealing rings to the radiator and secure them with clips.
9. Install the front buffer.
10. Connect ground wire to battery.
Visitor comments