Unscrewing the water pump pulley on the 2.3-I-VR5 engine
- 1 - pulley mounting bolts;
- 2 - belt pulley;
- 3787 - special tool for holding the pulley
Warning: The basic operations for removing and installing the water pump are described in subsection 3.6.1.1. This subsection describes only operations that relate to the 2.3-I-VR5 engine.
Order of execution
1. unscrew the bolts (1), holding the belt pulley (2) water pump. In this case, use a special tool to keep the water pump pulley from turning.
2. Unscrew three bolts and remove the water pump.
3. When installing the water pump, the plug on the pump housing must be at the bottom.
Visitor comments