1. Unscrew the bolts (indicated by arrows), securing the hood lock (1).
2. Close the hood and check its position relative to adjacent surfaces.
3. Adjust the position of the hood so that when the hood is closed, the gap around the perimeter of the hood is the same on all sides.
4. To adjust, loosen the hood hinge bolts and move the hood to adjust its position.
(The original information is posted on the website www.vwmanual.ru)
5. After adjustment, tighten the bonnet hinge mounting bolts to 20 Nm.
6. Adjust the hood installation height by rotating the rubber buffers (2) (see figure Hood fastening elements).
7. Tighten the bonnet lock mounting bolts to 20 Nm.
Visitor comments