Arrangement of elements of fastening of facing of a niche of a back wing
- 1 - lining of the niche of the rear wing;
- 2 - bracket with nut;
- 3 - screw;
- 4 - nut
Removing
1. Raise the rear of the car and secure it on stands.
2. Remove the corresponding rear wheel.
3. Unscrew 7 screws (3), fastening the lining of the rear wing niche.
4. From under the wing arch, remove the lining of the rear wing niche.
Installation
1. Install rear fender recess trim under fender arch and secure with screws.
2. Install the rear wheel, then lower the vehicle to the ground.
3. Tighten the wheel bolts diagonally to 120 Nm.
Visitor comments