Body side trim
- 1 - front door trim;
- 2 - trunnion;
- 3 - centering ledge;
- 4 - centering ledge;
- 5 - trunnion;
- 6 - lining of the rear door;
- 7 - protective film
Removing
1. Gradually heating the door lining with a hair dryer, soften the adhesive layer of the lining and remove the lining from the door.
2. Clean the surface on the door to install the trim, first with gasoline and then with silicone remover.
3. Wipe and dry the cleaned door surface.
Installation
1. Remove the protective film from the cover.
2. Install the trim on the door and press it firmly.
Visitor comments