Contents: Checking the bottom and body by…↓ External inspection of all seat belts ↓ Lubrication of door stops ↓
Bottom protection and cavity preservation – check.
Seat belts - check for damage.
Door stops - lubrication.
Checking the bottom and body by external inspection
During regular maintenance, pay attention to damage to the varnish coating.
Clean the bottom more often.
External inspection of all seat belts
Attention! Noises when the seat belt twists are caused by technical factors. If there is a lot of noise, replace only the belt. Never use oil or grease to reduce noise. The automatic system cannot be disassembled, as this will cause the tension spring to pop out. Risk of injury!
1. Pull the belt out to the end and check the condition of the fibers. They may be torn. In this case, replace the belt.
2. If there are abrasions without breaking the fibers, the belt does not need to be replaced.
3. Check the heavy-running belt for twisting; if necessary, remove the trim on the middle pillar.
(The original can be viewed on the portal: VWManual.ru)
4. Clean seat belts with soap and water only. Never use solvents or chemical cleaners.
Lubrication of door stops
Door stops
Lubrication points are indicated by arrows.
Lubricate door stops and fastening screws with cylinder lock spray G 000 400 01.
Visitor comments