21. Insert the hub into the basket, inserting one of the hub projections into the ball socket in the basket. Roll the hub into the basket and turn it 90°.
22. Install the basket. Push the basket in, making sure that the basket's axis of symmetry coincides with the axis of symmetry passing through the opposite projections of the housing. Insert the basket with the hub into the hinge housing.
23. Turn the basket with the hub so that the axis of symmetry 1 of the basket coincides with the axis of symmetry 2 passing through the opposite grooves in the hinge housing (photo 7.9).
24. Rotate the basket with the hub to the initial position, see point 3.10. It is necessary to pay attention that the hub is marked before disassembling (photo 7.11)
25. Tilt the basket with the hub, as during disassembly, and insert the balls into the sockets in the basket one by one. It is more convenient to insert the balls on opposite sides of the basket. This will prevent the hub from jamming. If it locks, you can knock on the side surface of the hub.
Visitor comments