Contents: Removal ↓ Installation ↓
Removal
Remove the inner and outer triangular trims. If necessary, remove the outer mirror.
Remove the outer seal of the window shaft from the edge.
Remove the inner window glass guide from the edge.
Press the outer window glass guide away from the edge using a large screwdriver. Start pressing from the rear upper corner.
Installation
First insert the window glass guide into the rear part of the shaft.
Place the guide down and, starting from the top corner, place it on the edge.
Note: The retaining edge must be fully secured.
Place the inner window glass guide and window shaft seal onto the edge.
Install both triangular trims and the outside mirror.
Visitor comments