Use a bent wrench to loosen the shock absorber strut lock nut. The car is standing on its wheels.
Remove the sheet and upper rubber support.
Raise the car on supports and remove the wheel.
Support the axle.
Loosen the lower threaded connection of the shock absorber strut and remove the shock absorber strut.
When assembling, tighten the lower threaded connection with a torque of 45 Nm and the lock nut at the top with a torque of 35 Nm.
The rear shock absorber consists of the following parts: 1 - rings; 2 - upper spring support; 3 - coil spring; 4 - stop buffer; 5 - shock absorber; 6 - safety cover.
Visitor comments