Instructions: The following illustrations show the removal and installation of the AFS power module on the right headlight. Removal and installation on the left headlight is carried out similarly.
Remove headlight. Remove three bolts -arrows-.
Instructions: When removing the AFS power module from the headlight housing, also disconnect the electrical connector at the same time.
Remove power module for AFS -1- directly upwards from headlight housing.
Installation is carried out in the reverse order.
Caution: When installing the power module of the AFS system, pay attention to the correct position of the seal. If water gets inside the headlight, it may fail.
Tighten the mounting bolts to the prescribed torque. Check headlight operation.
Visitor comments