Instructions: The following figures show the removal and installation of the headlamp switching device with a gas discharge lamp on the right headlamp. Removal and installation on the left headlamp is performed similarly.
Remove the headlight. Unscrew both screws securing the "arrow".
Instructions: When removing the headlight switching device with a gas-discharge lamp from the headlight housing, simultaneously disconnect the corresponding electrical connector.
Remove the headlight switching device with gas discharge lamp "1" directly upwards from the headlight housing.
Installation is carried out in reverse order.
Caution: When installing the headlamp switch with a gas discharge lamp, pay attention to the correct position of the seal. If water gets inside the headlamp, it may fail.
Tighten the mounting bolts to the specified torque. Check the operation of the headlight.
(The original text can be found at: VWmanual)
Visitor comments