Instruction: The illustrations show how to replace the cornering light bulb -L149- on the right headlight. Replacing the cornering light bulb -L149- on the left headlight is carried out in the same way.
Remove plug -1-.
Instructions: To remove and install the cornering light bulb, the reflector holder must be released from the ball head of the repositioning device.
Press reflector holder -1- in area of upper reflector fixing screw in -direction of arrow- to release it.
Carefully turn the cornering light bulb holder -1- counterclockwise in the -direction of the arrow- to unlock it. Carefully remove the cornering light bulb, taking into account the length of the connected wiring, from the headlight.
Remove cornering light bulb -1- in -direction of arrow- from socket -2-. Adaptive light lamp: 12V, 55W.
Installation
Instructions: When installing the lamp, do not touch the glass bulb. Fingerprints leave greasy prints on the lamp glass, which evaporate after switching on the headlights, and the light of the lamp may dim.
Installation is carried out in the reverse order.
Instructions: Insert the cornering light bulb. due to limited space, should be done as follows.
Make sure the reflector holder is in the released position. Insert the socket with the adaptive light bulb into the reflector holder.
Instruction: For the sake of clarity, the blocking of the cornering light lamp in the reflector holder is shown in the section.
Post» ledge» -2- of the lamp socket in the groove of the reflector holder -3- as shown in the figure. Screw cartridge -1- forwards slightly in -direction of arrow- to secure it in deflector holder. Fix further the reflector holder with an audible click.
Caution: When installing the cover, pay attention to the correct position of the cover. If water enters the headlight, it may be damaged.
Close headlight cover. Check headlight operation.
Visitor comments