Instruction: The illustrations show how to replace the front right turn signal bulb -M7- on the right headlight. Replacing the front left turn signal bulb -M5- on the left headlight is carried out in the same way.
Switch off the ignition and all electrical consumers, remove the ignition key. Remove plug -1-.
Turn socket with -1- in front turn signal bulb a in -direction of arrow- and pull socket back out of reflector, taking into account length of connected wires.
Press the front turn signal bulb -2- into the holder -1- and turn it in -direction of the arrow- to unlock it. Front turn signal lamp: 12V, 21W.
Installation
Caution: When installing the cover, pay attention to the correct position of the cover. If water gets inside the headlight, it may fail. When installing the lamp, do not touch the glass bulb. Fingerprints leave greasy prints on the lamp glass, which evaporate after switching on the headlights, and the light of the lamp may dim.
Installation is carried out in the reverse order. Check headlight operation.
Visitor comments