Instructions: The process of removing and installing the right door stutter is described. Removal and installation of the lock of the left door is made in the same way.
Remove carrier panel. Turn support panel -4- and unplug connector -2- of lock. Knock out retainers -3- with punch. Use a screwdriver to separate the lock -1- together with the bracket -6- and the handle housing -7- from the base plate. Remove cable -5- from support panel.
Remove the handle housing. Remove bracket. Detach retainer -5- by turning it in direction of -arrow a-. Remove holder -5- from seat -arrow b-. Turn cable -4- by 90°-arrow c- and pull end piece -3- out of eyelet -2-.
Turn the lock -1- to the other side. Unclip -holder 2- by turning it in the direction of -arrow a-. Remove holder -2- from seat. Turn cable -3- in direction of -arrow b- and remove end piece -4- from lug -5-.
Visitor comments