Instructions: Before carrying out work on adjusting the position of the rear door, place the car on a hard, level surface. The position of the rear door is adjusted correctly if, when closed, it smoothly passes into other body panels, does not sink inward or protrude outwards, and has a uniform gap around the entire perimeter. After installation or adjustment, it is necessary to carry out anti-corrosion treatment of hinges and bolts.
To correctly adjust the clearances, the bolts -2, 3, 5 and 6- on the B-pillar must be loosened. For access to bolts -2 and 5- it is necessary to remove facings of rack B; The tool -3410- can be used to loosen/tighten. Debating adjustment methods, for example, by moving the door up, will not work. Subsequently, the door will still sag under its own weight. For correct adjustment of the installation depth of the door, it is necessary to loosen the bolts -4 and 7-. During work, use door adjustment key -3320- and bit -3320/3-.
Visitor comments