CAUTION: If the B-pillar has been replaced, the bolts on it must be tightened as described below.
The B pillar has been replaced. Installation is carried out in the reverse order. Install the door and tighten -bolts 6, 7, 11 and 16- to 32 Nm. Install all door parts in place. After completing all work, tighten bolts -6, 7, 11, and 16- to 20 Nm. In this case, it is always necessary to use new bolts. Check the gaps around the perimeter of the front door.
[The original material is available on the portal: VWMANUAL]
Visitor comments