Removing
Instructions: Below is a description of the removal and installation of the right cover. Removal and installation of the left cover is carried out in the same way.
Insert hook -3438- for 110 mm -dimension a- and the door behind the striker. Pull locking clip -1- back 5 mm -arrow a-. Pull handle -2- slightly away from door -arrow b-. Remove cover -3- from handle housing away from door -arrow c-.
Instruction: The handle is adjacent to the surface of the door.
Installation
Pull handle -2- slightly away from door -arrow c-. Insert the cover -3- into the handle housing, pressing perpendicular to the door. Insert hook -3433- 110 mm -dimension a- into the door and place it on the locking hook.
Instructions: When installing, the cover must be pressed against the door.
Move locking hook forward 5 mm -arrow b-. Further installation is carried out in the reverse order. Finally, with the door open, you need to check the operation of the lock.
Visitor comments