Instructions: The right side of the car is shown in the pictures. The work is performed in a similar manner for the left side. Always replace the unscrewed hinge mounting bolts with new ones. After replacing the hinge, it must be lubricated.
- 1 - Door
- 2 - Door hinge. The upper part of the hinge is connected to the lower part using a bolt "4", the hinge consists of two parts, lubrication of the hinge after replacement
- 3 - Bolt, 32 Nm, always replace removed bolts with new ones
- 4 - Bolt, to remove the door, unscrew only this bolt from the door hinge, 30 Nm
- 5 - Door hinge, the lower part of the hinge is connected to the upper part using bolt "4", the hinge consists of two parts, lubrication of the hinge after replacement
- 6 - Bolt, screwed in from the inside of the car, 32 Nm. After replacing the B-pillar, other tightening torques must be used, removed bolts must always be replaced with new ones
- 7 - Bolt, 32 Nm. After replacing the rack, you need to use other tightening torques, always replace the removed bolts with new ones
- 8 - Bolt, 32 Nm
- 9 - Door opening limiter
- 10 - Bolt, 2 pcs., 9 Nm
- 11 - Bolt, screwed in from the inside of the car, 32 Nm. After replacing the B-pillar, other tightening torques must be used, removed bolts must always be replaced with new ones
- 12 - Door hinge, the lower part of the hinge is connected to the upper part using bolt "13", the hinge consists of two parts, lubrication of the hinge after replacement
- 13 - Bolt, to remove the door, unscrew only this bolt from the door hinge, 30 Nm
- 14 - Door hinge, the upper part of the hinge is connected to the lower part using a bolt "13", the hinge consists of two parts, lubrication of the hinge after replacement
- 15 - Bolt, 32 Nm, always replace removed bolts with new ones
- 16 - Bolt, 32 Nm, after replacing the B-pillar, other tightening torques must be used, removed bolts must always be replaced with new ones
Visitor comments