Removal and installation the outer handle housing (VW Tiguan 1)

Removal

Remove the carrier panel. Press down the lock "arrow a" on the handle body "1". Move the handle body "1" in the direction of "arrow b" until the fasteners "6" and the guide of the bracket "5" are fully visible. Remove the handle body from the bracket. Remove the cable "1" from the guide in the handle body "2". Turn the cable "1" in the direction of the "arrow" and remove the tip "3" from the eye.

Installation

Secure the end "3" of the cable in the eye and turn the cable "1" towards the body in the direction opposite to the "arrow". Secure the cable "1" in the guide on the body of the handle "2". Insert the fasteners "6" of the body of the handle "1" into the guides of the bracket "5". Slide the body of the handle into the bracket until the lock "arrow a" clicks into place.

[The information is presented on the website: VWManual.ru]