Instructions: Below is a description of the work on removing and installing the right door lock. The left door lock is removed and installed in a similar manner.
Remove the carrier panel "5". Turn the subframe "5" and disconnect the connector "2" of the lock "1". Knock out the locks "3" with a punch. Separate the lock "1" together with the bracket "6" and the handle housing "7" from the subframe with a screwdriver,
Remove the handle housing. Remove the bracket. Disconnect the holder "5" by turning it in the direction of "arrow a". Remove the holder "5" from the seat "arrow b". Turn the cable "4" by 90° "arrow c" and remove the tip "3" from the eye "2".
Turn the lock "1" to the other side. Disconnect -holder 2- by turning it in the direction of "arrow a". Remove the holder "2" from the seat. Turn the cable "3" in the direction of "arrow b" and remove the tip "4" from the eye "5".
Visitor comments