Contents: Removal ↓ Installation ↓
Removal
Instructions: The lock cylinder is only in the driver's door.
The cylinder cover is removed. Remove cover "4" from the locking bolt. Unscrew locking bolt "3" of cylinder "1". Unscrew bolt "5" to its full length, but do not remove it. Then press bolt "5" completely inward. This will move the cylinder locking bracket. Lightly pull door handle "2". And remove cylinder "1".
Instructions: The handle is in contact with the door surface.
Installation
Insert the cylinder "1" at a right angle into the handle body. Screw bolts -3 and 5- into the body.
Instructions: When installing, the cylinder must be pressed against the door.
Further installation is carried out in the reverse order. Finally, with the door open, you need to check the operation of the lock.
Visitor comments