The direction indicators only work when the ignition is on.
Right turn signal, switch up (1).
Left turn signal switch down (2).
When the direction indicator is on, the control lamp flashes simultaneously.
Once the vehicle has completed the curve, the turn signal will turn off automatically.
Giving a turn signal before changing lanes
The switch only needs to be pushed up (1) or down (2) until the back pressure increases and hold in this position - the control lamp should flash simultaneously with the direction indicator.
Light signal
Move the steering column switch to the steering wheel (3), the high beam warning lamp will come on.
Switching to high or low beam
Switching with the dipped beam or high beam on is done by pushing the switch forward (4). When switching to high beam, the high beam warning lamp comes on.
Parking lighting
The parking lights are on only when the ignition is off.
Parking lights on the right, switch up (1).
Parking lights on the left, switch down (2).
After removing the key from the ignition switch, a buzzer sounds when the driver's door is open.
Visitor comments