Disconnect wires from starter relay.
Unscrew the hexagon head bolts or hexagon socket head bolts of the starter mounting flange.
On pre-November 1977 models, additionally detach the clamp clip near the engine block.
Remove starter.
When installing, tighten the screws on the mounting flange to 20 Nm.
On vehicles manufactured before November 1977, it is imperative to reattach the tie-down bracket.
Here the starter is mounted on an engine with a manual gearbox: 1 - wire from the battery (terminal 30); 2 - wire from the ignition switch (terminal 50); 3 - starter relay; 4 - starter
Visitor comments