Dismantling
Remove the suction pipe.
Pic. 2.190. Plug and bolts of fastening of a support of an inlet manifold
Remove plug 1 from the holder and release the cable (pic. 2.190).
Unscrew all electrical wires from the intake manifold support.
Unscrew bolts 2–4 and remove the intake manifold support.
Disconnect the water hose from the coolant supply pipe.
Pic. 2.191. Water hose and water cooling tube bolts
Disconnect the water hose 1 from the coolant supply pipe (pic. 2.191).
Unscrew bolts 2–3 and remove the tube.
Installation
Installation is carried out in the reverse order, paying attention to the following.
Gaskets and o-rings must be replaced.
All hose connections must be secured with standard model year clamps.
Visitor comments