Removing
Remove the driver's airbag module.
Pic. 5.7. Removing the steering wheel
Disconnect the plug connection 1 and 2 of the vito spring (pic. 5.7).
Turn the steering wheel to the middle position (wheels are straight).
Remove screw 3 and pull the steering wheel off the column.
Installation
Install the steering wheel on the column.
The center marks of the steering wheel and column must match.
Insert the plug connector of the steering angle sensor into the hole provided for this purpose in the base of the steering wheel.
Connect plug 1 to pin 2 of the steering angle sensor.
Secure the steering wheel with bolt 3, tightening torques.
Put a core mark on the bolt.
The bolt can be used five times.
Visitor comments