Removing
Remove the front wall of the plenum box.
Pic. 5.18. Bolt in plenum box
Unscrew the bolt in the plenum box (pic. 5.18).
Remove the steering column.
Remove screws 1.
Pic. 5.19. damper mount
Unscrew bolt 2 and remove damper 3 (pic. 5.19).
Installation
Attach the damper to the body by tightening the bolt.
Insert and tighten bolt 2.
Tighten the bolts 1 of the damper 3 with a torque of 10 Nm.
Install the steering column.
Install the front wall of the plenum box.
Tightening moments.
Then carry out a basic adjustment of the steering angle sensor using a tester.
Visitor comments