Note: By loosening the screws 2, it is possible to move the lock bracket 1 in the holes with a margin.
Pic. 8.30. lock shackle
Adjust the lock shackle 1 so that the notch in the trunk lid lock snaps into place in the center of the lock shackle 1 (pic. 8.30).
Remove the lining of the lock shelf:.
Loosen lock 1.
Bring the lock 1 to the upper position and tighten the screws 2 (pic. 8.30).
Close the trunk lid and check its adjustment.
Tightening torques: bolts 2: 23 Nm.
Visitor comments