Contents: Turning on the side lights ↓ Turning on and switching the…↓ Turning on the turn signal ↓ Turning on the fog lights and rear…↓ Turning on the hazard warning lights ↓ Headlight corrector ↓ Turning on interior lighting ↓
Turning on the side lights
Press switch 1, located under the left side ventilation nozzle, to the first fixed position (Fig. 10).
The brightness of the instrument lighting is adjusted by handle 2, located to the right of switch 1.
Turning on and switching the headlights
The low or high beam headlights are switched on by pressing switch 1 (Fig. 11) to the second position. Switching between low and high beam headlights is done by pressing the lever of the right steering column switch. The same pressing of the lever is used to signal with high beam headlights.
Turning on the turn signal
The direction indicators are switched on by the left steering column switch (Fig. 11). At the same time, the indicator lamp and the audible signal of the direction indicators are switched on.
NOTE: When turning on the direction indicators when overtaking or changing lanes, especially on motorways, do not press the selector lever all the way down, but hold it near the fixed position for the duration of the maneuver. At the end of the maneuver, release the lever, which will automatically return to the neutral position.
Turning on the fog lights and rear fog light
The rear fog light is switched on by a switch located above the interior heater control switches, on the right. The switch operates only after the exterior lighting switch is moved to the low beam position. When the rear fog light is switched on, the indicator lamp located to the right of the "PT" switch lights up (fig. 21).
Fog lights (depending on the configuration) are switched on by the "PT" switch, located above the heater control panel, on the right. Pressing the switch to the first position switches on the fog lights, and to the second position simultaneously switches on the fog lights and the headlight.
Turning on the hazard warning lights
All four direction indicators are switched into hazard warning mode by pressing the switch with a built-in indicator lamp, located on the instrument panel under the speedometer (Fig. 12).
Headlight corrector
On some vehicles, the headlight beam angle is adjusted by a regulator located to the right of the instrument lighting adjustment rheostat.
Turning on interior lighting
The interior light switch is located on the ceiling light and has three positions (Fig. 13): middle position (0) — the ceiling light is off; left position (1) - the lamp is on constantly; right position (2) - the lamp is switched on by switches in the door pillars.
On some vehicles, there is a directional light for reading maps located next to the dome light, which is turned on by a built-in switch.
Some vehicles have one or two rear interior lights, which are located in front of the grab handles and are switched on by built-in switches independent of the switches in the door pillars.
Visitor comments