Switching on side lights
Side lights are switched on by pressing to the first fixed position 4 (pic. 17) key 1, located to the left of the speedometer.
Pic. 17. Switching on lighting and alarm: 1 - instrument panel lighting switch; 2 - rheostat for adjusting the intensity of illumination of the instrument panel. the position of the key for turning on the external lighting; 3 - off; 4 - side lights are on; 5 - low / high beam is on; PR - turn right; L - turn left; P - rebuilding (pressing the stalk lever up or down without using the detent); K - short-term inclusion of high beam headlights (without fixation), B / D - low / high beam
Turning on and switching the headlights
When you press the button 1 to the second fixed position 5, the dipped or main beam headlights are turned on.
Switching from low beam to high beam is done by pressing the left steering column switch away from you or towards you. When the high beam headlights are switched on, a blue indicator lamp lights up on the instrument panel.
Turning on the rear fog lights is done by pressing the button 14 (see fig. 5), while the indicator lamp with the corresponding symbols lights up on the instrument panel.
The fog lamps can only be switched on when the dipped or main beam headlights are on.
Replacement headlights and taillights
Replacement of halogen lamps in the headlights is carried out from the side of the engine compartment. To replace the bulbs, remove the protective cap from the back of the headlight (pic. 18) and replace the lamp.
The rear light bulbs are accessed from the luggage compartment side. Press the latch to replace the lamps (shown by the arrow in Fig. 19) and take out the lamp holder with lamps.
Visitor comments