The display is controlled by switches located at the end of the wiper / washer lever.
Slider switch «A» information is reset (provisions «1» and «2»), and the button «5» at the end of the switch lever, information is sequentially displayed on the display in a strictly defined order, starting with the clock.
The computer has two storage devices (memory), containing the following information.
In the memory of current information (position «1» slider «A» switch):
- duration of the trip in hours and minutes, not counting the duration of stops;
- average fuel consumption in l/100 km,
- distance traveled in km;
- average speed, km/h.
When parking for more than two hours, the accumulated information is automatically erased.
In the memory of summing information (position «2» slider «A» switch):
- driving time: 100 km;
- distance traveled: 10,000 km;
- fuel consumption: 1000 l.
Regardless of both memories, the display shows the following current information:
- engine oil temperature within 50-160°С;
- outside air temperature in the range from -40 to +50°С.
Visitor comments