The direction indicators only work when the ignition is on.
To turn on the right direction indicators, you need to raise the lever; to turn on the left indicators - lower the lever. At the included indexes of turn the control bulb lights up.
After the turn is completed, the direction indicators are automatically turned off.
Using direction indicators when changing lanes (lane change)
Raise or lower the lever until it stops, and do not release it - the control light should be on.
Switching high / low beam headlights
To switch headlights (from near to far or from far to near, depending on which light is on at the moment), pull the lever towards you (to steering wheel rim), against the resistance of the spring until you hear a click. When the high beam is switched on, the control lamp lights up. Pull the lever to the steering wheel until it clicks - when you turn on the high beam, the control light comes on.
parking lighting control
Parking lighting is switched on only when the ignition is switched off. To turn on the parking lights on the right, you need to lift the lever up; to turn on the lights on the left - lower the lever down.
Notes: When using signal lights and external lighting, the national regulations must be observed.
Notes: If the direction indicators, headlights or parking lights are not switched off after the key is removed from the ignition switch, a buzzer will sound when the driver's door is opened.
Visitor comments