Disconnect the radiator inlet hose from the thermostat housing and drain the fluid.
Check the tightness of the cooling system hose clamps.
Fill the expansion tank with coolant up to the MAX mark on the tank.
Start the engine and let it run to remove air pockets in the cooling system.
Check the fluid level in the expansion tank and top up if necessary.
Cooling system details:
1 - radiator;
2 - hoses of the cooling system;
3 — electric fan mounting bracket;
4 - sensor for turning on the electric fan;
5 - fan impeller;
6 - fan motor;
7 - expansion tank;
8 — stopper of a broad tank;
9 - coolant temperature sensor;
10 - oil cooler (on vehicles with automatic transmission);
11 - water pump drive pulley;
12 - pump cover with bearing and impeller;
13 - gasket;
14 - water pump housing;
15 - thermostat;
16 - gasket;
17 - branch pipe.
Visitor comments