Contents: Front Ceiling Light/Reading Light ↓ Rear compartment light ↓ Door light ↓ Glove box light ↓ Vanity mirror/trunk light ↓
1. Turn off the ignition and interior lighting.
2. Disconnect the battery.
3. Paste the upholstery of the ceiling near the lampshade in the place where the lampshade will be pried off with a screwdriver, to avoid damaging the upholstery.
Attention! After replacing the old bulb with a new one, check its functionality.
Front Ceiling Light/Reading Light
4. Carefully remove the diffuser 1 of the lampshade by prying it from the front with a plastic wedge, for example, HAZET 1965-20 (see illustration).
5. Remove spotlight bulb 2 from the lampshade and insert a new one (see illustration 34.4).
6. Remove reading light bulb 3 and install a new one(see illustration 34.4).
Attention! If you need to remove the lampshade from its mounting place on the ceiling, unscrew the two screws 4 and release the two fasteners and only then detach the lampshade from the ceiling (see arrows in illustration 34.4).
Rear compartment light
7. Remove the diffuser 1 of the lampshade using a screwdriver (see illustration).
8. Remove the spotlight bulb from the holder and insert a new one.
Attention! If the lampshade needs to be removed from its mounting location on the ceiling, it is necessary to remove both lampshade diffusers, then release the four fasteners and only then detach the lampshade from the ceiling (see arrows in illustration 34.7).
Attention! If the rear interior light of the Touran has sensors of the alarm system, then the procedure for removing and installing such a light is the same, as with Golf cars.
Door light
9. Open the door and remove the door light from the trim by prying it up with a flat-head screwdriver.
10. Remove diffuser 1 by pressing its locking tabs (see arrows A in the illustration) from the body of the lantern 2.
11. Remove the spotlight bulb from the holder and insert a new one.
Glove box light
12. Open the glove compartment.
13. Use a flat-head screwdriver or plastic wedge to pry the glove box light out of its mounting location.
14. Disconnect the flashlight power plug (see arrow in illustration).
15. Remove the bulb from the lamp socket and insert a new one.
Vanity mirror/trunk light
The vanity mirror/trunk light and the bulbs in them are removed and replaced in the same way, as with Golf cars.
Visitor comments