Contents: Removal ↓ Installation ↓
Attention! The indicators on the instrument panel contain LED bulbs. If one of them fails, the instrument panel must be replaced as a set.
Removal
1. Disconnect the battery.
Caution: Observe safety precautions when handling air bags.
2. Remove the steering wheel airbag, see the relevant chapter.
3. Remove the steering wheel, see the relevant chapter.
4. Remove the upper part of the steering column trim, see the corresponding chapter.
5. Unscrew the two bolts (see arrows in the illustration) and remove the instrument panel from the panel by pushing it back.
Caution! The plug connection is disconnected when the shield is removed.
Installation
The instrument panel is installed in the reverse order of removal.
When replacing the old instrument cluster with a new one, coordinate and enter new data regarding the vehicle service dates, mileage, ignition key codes, etc. using a diagnostic tester by contacting a workshop.
6. Turn on the ignition and check the operation of the signal lights and indicators on the instrument panel.
Visitor comments