Removing
1. Disconnect the battery.
2. Disconnect lining of a luggage carrier on joints with an overlay.
3. Remove the rear seat.
4. Four-door cars. Remove the rear seat armrests.
5. Two-door cars. Remove a back of a back seat.
6. Two-door cars. Remove the top facing of a back rack.
Attention! The seat belt anchor does not need to be removed.
7. Two-door cars. Remove the rear side trim.
8. Unscrew the screws 1 and 2 and release the shelf 3 from the fasteners (see illustration).
9. Disconnect the plugs. Their number depends on the configuration of the car.
Installation
10. Check that the shelf latches are not damaged and that they are properly seated on the shelf. If necessary, replace damaged clips with new ones.
The shelf is installed in the reverse order of removal.
Visitor comments